|
Driving
From Baltimore:
Take I-95 South to the Capital Beltway (I-495)
and follow signs to College Park, US Route 1
South. Proceed approximately two miles south on
US Route 1 to the University's Campus Drive
entrance. Turn right onto Campus Drive and
immediately make another right turn onto Paint
Branch Drive. Go straight, and at the second
stop sign make a left and then an immediate
right into the visitor parking area. After
exiting your vehicle, enter the Kim Engineering
Building (immediately before the visitor parking
lot on Paint Branch Drive).
Parking on Friday
(30th): P Visitor Lot
($2 for an hour with $10 per day
maximum; coupons may be available at
the registration desk)
Parking on Saturday (31st): 9c, 11b, & 11c
(free parking on Saturday)
*The Building 225 in the map is the conference
site (Jeong
H. Kim
Engineering Building)
From Annapolis and points east:
Take US Route 50 to the Capital Beltway
(I-95/495) and go north on I-95/495 to College
Park, US Route 1 South (exit 25). Proceed
approximately two miles south on US Route 1 to
the University's Campus Drive entrance. Turn
right onto Campus Drive and immediately make
another right turn onto Paint Branch Drive. Go
straight, and at the second stop sign make a
left and then an immediate right into the
visitor parking area. After exiting your
vehicle, enter the Kim Engineering Building
(immediately before the visitor parking lot on
Paint Branch Drive).
Parking
on Friday
(30th): P Visitor Lot
($2 for an hour with $10 per day maximum; coupons
may be available at
the registration desk)
Parking on Saturday (31st): 9c, 11b, & 11c
(free parking on Saturday)
*The Building 225 in the map is the conference
site (Jeong
H. Kim
Engineering Building)
From within the city of Washington, D.C.:
Go northeast on Rhode Island Avenue (US Route
1). After entering the state of Maryland,
continue on US Route 1 for approximately five
miles to College Park. Turn left at the light
onto Campus Drive and immediately make another
right turn onto Paint Branch Drive. Go straight,
and at the second stop sign make a left and then
an immediate right into the visitor parking
area. After exiting your vehicle, enter the Kim
Engineering Building (immediately before the
visitor parking lot on Paint Branch Drive).
Parking
on Friday
(30th): P Visitor Lot
($2
for an hour with $10 per day maximum; coupons
may be available at
the registration desk)
Parking on Saturday (31st): 9c, 11b, & 11c
(free parking on Saturday)
*The Building 225 in the map is the conference
site (Jeong
H. Kim
Engineering Building)
From points south and west of Washington, D.C.,
and Montgomery County, MD:
Take the Capital Beltway (I-495) and head north
and east. Just after I-495 joins I-95 in
Maryland above Washington, D.C., get off at exit
25B toward College Park on US Route 1 South.
Proceed approximately two miles south on US
Route 1 to the University's Campus Drive
entrance. Turn right onto Campus Drive and
immediately make another right turn onto Paint
Branch Drive. Go straight, and at the second
stop sign make a left and then an immediate
right into the visitor parking area. After
exiting your vehicle, enter the Kim Engineering
Building (immediately before the visitor parking
lot on Paint Branch Drive).
Parking
on Friday
(30th): P Visitor Lot
($2 for an hour with $10 per day maximum; coupons
may be available at
the registration desk)
Parking on Saturday (31st): 9c, 11b, & 11c
(free parking on Saturday)
*The Building 225 in the map is the conference
site (Jeong H. Kim Engineering Building)
Via Metrorail
Metrorail's Web
Site and Map
From Washington, D.C .:
Take the Green Line train toward Greenbelt and
get off at the College Park/U of MD station. Get
on the UM Shuttle bus for the ride to the
campus. Get off at the first campus stop, which
will be directly in front of the Glenn L. Martin
Institute of Technology. Walk back toward the
entrance to campus. Turn left onto Paint Branch
Drive. At the first stop sign, the Kim
Engineering Building will be on your left. Enter
through the main doors.
From the Ronald Reagan National Airport:
Take the Yellow Line train (toward Mt. Vernon
Square/UDC) and get off at the Gallery
Place/Chinatown station. Then transfer to the
Red Line train (toward Wheaton) and get off at
the Fort Totten station. Then transfer to the
Green Line train (toward Greenbelt) and get off
at the College Park/U of MD station. Get on the
UM shuttle bus for the free ride to the campus.
Get off at the first campus stop, in front of
the Glenn L. Martin Institute of Technology.
Walk back toward the entrance to campus. Turn
left onto Paint Branch Drive . At the first stop
sign, the Kim Engineering Building will be on
your left. Enter through the main doors.
From the D.C. Bus Station
(serving Greyhound and Trailways):
From the Washington, D.C. bus station (at 1005
First Street N.E.), take Metro Bus 96 to Union
Station and get onto the Red Line train (toward
Wheaton). Get off at the Fort Totten station.
Then transfer to the Green Line train (toward
Greenbelt) and get off at the College Park/U of
MD station. Get on the UM Shuttle bus for the
ride to the campus. Get off at the first campus
stop, which will be in front of the Glenn L.
Martin Institute of Technology. Walk back toward
the entrance to campus. Turn left onto Paint
Branch Drive. At the first stop sign, the Kim
Engineering Building will be on your left. Enter
through the main doors.
From Local Airports
From the Baltimore-Washington International (BWI)
Airport:
Upon exiting the airport, follow the signs and
get onto I-195 West. Follow I-195 West for about
3.5 miles and get onto I-95 South. Follow I-95
South for about 19 miles and follow the signs to
Exit 25. Get off at Exit 25B. Go south on U.S.
Route 1 for two miles to the University's Campus
Drive entrance on your right. Turn right onto
Campus Drive and immediately make another right
turn onto Paint Branch Drive. Go straight, and
at the second stop sign make a left and then an
immediate right into the visitor parking area.
After exiting your vehicle, enter the Kim
Engineering Building (immediately before the
visitor parking lot on Paint Branch Drive).
From the Washington Dulles International (IAD)
Airport
Upon exiting the airport, follow the Dulles
Airport Access Road East for about 13 miles and
exit it onto I-495 North. Follow I-495 North for
about 18 miles and get off at Exit 25B. Go south
on U.S. Route. 1 for two miles to the
University's Campus Drive entrance on your
right. Turn right onto Campus Drive and
immediately make another right turn onto Paint
Branch Drive. Go straight, and at the second
stop sign make a left and then an immediate
right into the visitor parking area. After
exiting your vehicle, enter the Kim Engineering
Building (immediately before the visitor parking
lot on Paint Branch Drive).
From Ronald Reagan National (DCA) Airport
Upon exiting the airport to the north (toward
Washington, D.C.), get onto the George
Washington Memorial Parkway. Within a mile, turn
right onto U.S. Route 1/I-395 North (to
Washington). Stay in your left lane while
crossing the bridge over the Potomac River. (You
will follow U.S. Route. 1 through Washington to
College Park). After crossing the Potomac and
passing the Washington Monument on your left,
turn right (east) onto Constitution Avenue. Go
eight blocks and turn left (north) onto 6th
Street N.W. Go about 1.5 miles and bear right
onto Rhode Island Avenue. Then go 7.5 miles to
College Park and turn left at the University's
Campus Drive entrance. After turning left onto
Campus Drive , make an immediate right-hand turn
onto Paint Branch Drive. Go straight, and at the
second stop sign make a left and then an
immediate right into the visitor parking area.
After exiting your vehicle, enter the Kim
Engineering Building (immediately before the
visitor parking lot on Paint Branch Drive).
Web sites for major airports in the Washington
Metropolitan area:
|
